IndexTLZ-NBS12TLZ-NBS22Whiteness %88-9088-90BaSO₄Content %8892Specific Gravity (g/cm³)4.04.20Particle Size D50 (μm)1-2 μm1-2 μmResidue (45 μm)0.005% max0.005% maxOil absorption (ml/100g)12 max12 maxPH7±17±1Moisture % ≤0.150.15Addition ratio10-40%15-40%
Contact Now
IndexTLZ-NBS12TLZ-NBS22Whiteness %88-9088-90BaSO₄Content %8892Specific Gravity (g/cm³)4.04.20Particle Size D50 (μm)1-2 μm1-2 μmResidue (45 μm)0.005% max0.005% maxOil absorption (ml/100g)12 max12 maxPH7±17±1Moisture % ≤0.150.15Addition ratio10-40%15-40%
Contact Now
Synthesis Process：Produce the nano barium sulfate with carbonate solution and sulfuric acid andcoated with special technology.Application Areas：Transparent filler masterbatch Car PaintsIndexTLZ-PBS302BaSO₄ Content min%98% minMoisture max %0.15Water Soluble max %0.15lron Content5 ppmWhiteness %97 minBrightness (L Value )98-99%Oil Absorption10-20 g/cm³PH6.5-9.0Particle Size D500.3 μmResidue (45 μm)0.02% maxConductivity150 μs/cm
Contact Now
ltem No.SpecificationUsageTLZ-HF10CaF₂≥ 40%Used to make aluminumfluoride and hydrofluoric acidUsed to make aluminumfluoride and hydrofluoric acidTLZ-HF20CaF₂≥60%Used to make aluminumfluoride and hydrofluoric acidUsed to make aluminumfluoride and hydrofluoric acidTLZ-HF30CaF₂≥80%Used as a fluxTLZ-HF40CaF₂≥97%The raw material ofthe Acid Grade Fluorite
Contact Now
IndexTLZ-SS01TLZ-SS02Na2SO4 content ≥%99.099.0Particle Size D50 μm3.51.8325 mesh Residue ≤ %00Whiteness %9697Activation Grade ≥%9999Moisture ≤%0.100.10Water Insoluble ≤%0.020.02PH Value7.5±1.07.5±1.0Ca + Mg (as Ca) ≤%0.010.01Chloride (as Cl) ≤%0.100.10Fe ≤%0.0010.001
Contact Now
Index & StandardAnalysis ResultTLZ-NBS11BaSO4 Content≥88%D50 Particle size5-7 μmWhiteness (dry)≥90Specific Gravity4.00 g/m3Oil Absorption≤7 ml /100 gPH Value7±1Moisture≤0.15%The Residue (325 mesh)noApplication Areas:1. Flat and textured powder coating2.Oil base and water base paints and powder coating3. Plastic (high gloss PP, ABS, Masterbatch and etc.)4. Rubber5. Glue
Contact Now
Index & StandardAnalysis ResultTLZ-NBS22BaSO4 Content≥92%D50 Particle size1.2-1.7 μmWhiteness (dry)≥92Specific Gravity4.20 g/m3Oil Absorption≤10 ml /100 gPH Value7±1Moisture≤0.15%The Residue (325 mesh)noApplication Areas :1. Flat and textured powder coating2. Oil base and water base paints and powder coating3.Plastic (high gloss PP, ABS, Masterbatch and etc.)4. Rubber5. Glue
Contact Now
Index & StandardAnalysis ResultTLZ-NBS12BaSO4 Content≥88%D50 Particle size1.2-1.7 μmWhiteness (dry)≥92Specific Gravity4.00 g/m3Oil Absorption≤10 ml /100 gPH Value7±1Moisture≤0.15%The Residue (325 mesh)noApplication Areas:1. Flat and textured powder coating2. Oil base and water base paints and powder coating3. Plastic (high gloss PP, ABS, Masterbatch and etc.)4. Rubber5. Glue
Contact Now
IndexTLZ-SS01TLZ-SS02Na2SO4 content ≥%99.099.0Particle Size D50 μm3.51.8325 mesh Residue ≤ %00Whiteness %9697Activation Grade ≥%9999Moisture ≤%0.100.10Water Insoluble ≤%0.020.02PH Value7.5±1.07.5±1.0Ca + Mg (as Ca) ≤%0.010.01Chloride (as Cl) ≤%0.100.10Fe ≤%0.0010.001
Contact Now
Index & StandardAnalysis ResultTLZ-NBS21BaSO4 Content≥92%D50 Particle size5-7 μmWhiteness (dry)≥90Specific Gravity4.20 g/m3Oil Absorption≤7 ml /100 gPH Value7±1Moisture≤0.15%The Residue (325 mesh)noApplication Areas:1. Flat and textured powder coating2. Oil base and water base paints and powder coating3.Plastic (high gloss PP, ABS, Masterbatch and etc.).4. Rubber5. Glue
Contact Now
Product Features:1, The refractive index of this product is 1.64, same as most of the syntheticresin, and the particle size is nano grade, good transmittance of visible lightduring 390-780 nm, the optical property is very good.2, With special surface coated technology, low oil absorption, gooddistribution, good affinity with many kinds of resin, make the final productgood mechanical property, improve the filling rate, reduce the final cost.3, High L value, could guarantee the final product high glossy and goodbrightness.4, Without halogen, could guarantee the final product safety and cleanline
Contact Now
Application Areas：◆Oil drilling ◆Friction materials ◆Rubber ◆Radiation wallIndexTLZ-DB01TLZ-DB02AppearanceGranuleGranuleSpecial gravity ≥4.1 g/cm³4.2 g/cm³BaSO₄+ SrSO₄Content85%90%Hg ppm ≤1 ppm1 ppmCd ppm ≤3 ppm3 ppmAs ppm ≤40 ppm40 ppmPb ppm ≤1000 ppm1000 ppmSi0₂Content-3% maxFe₂O₃Content-3% maxCarbonates5000ppm max5000 ppm maxWater Soluble Alkaline Earth Metals As Calcium ≤250 mg/kg250 mg/kgMiosture2%2%Granule Size0-100 mm0-100 mm
Contact Now
Application Areas:There are three principal types of industrial use for natural fluorite, corresponding to different grades of purity. Metallurgical grade fluorite has traditionally been used as a flux to lower the melting point of raw materials and eliminate impurity in steel and aluminum production.Ceramic grade fluorite is used in the manufacture of opalescent glass, enamels, and cooking utensils. The highest grade, "acid grade fluorite" (40% or more CaF2) is used to make aluminum fluoride and hydrofluoric acid by reacting to the fluorite with sulfuric acid.P
Contact Now
Product Features:1, The refractive index of this product is 1.64, same as most of the syntheticresin, and the particle size is nano grade, good transmittance of visible lightduring 390-780 nm, the optical property is very good.2, With special surface coated technology, low oil absorption, gooddistribution, good affinity with many kinds of resin, make the final productgood mechanical property, improve the filling rate, reduce the final cost.3, High L value, could guarantee the final product high glossy and goodbrightness.4, Without halogen, could guarantee the final product safety and cleanline
Contact Now
ltem No.SpecificationUsageTLZ-HF10CaF₂≥ 40%Used to make aluminumfluoride and hydrofluoric acidUsed to make aluminumfluoride and hydrofluoric acidTLZ-HF20CaF₂≥60%Used to make aluminumfluoride and hydrofluoric acidUsed to make aluminumfluoride and hydrofluoric acidTLZ-HF30CaF₂≥80%Used as a fluxTLZ-HF40CaF₂≥97%The raw material ofthe Acid Grade Fluorite
Contact Now
IndexTLZ-NBS31TLZ-NBS32BaSO₄Content95% min95% minParticle Size D50 (μm)3-4 μm1-2μmWhiteness %90 min90 minSpecific Gravity (g/cm³)4.35/cm³4.35/cm³Oil absorption (mV100g)7 ml100g10 mV100gPH7±17±1Moisture %0.15 % max0.15 % maxResidue (45 um)-10-40%Addition ratio10-40%TLZ-NBS32Natural Barium Sulfate Technical Data:Powder coatingPaintPlasticsRubberFilmsPapermakingPharmaceuticals
Contact Now
Product Features:1, The refractive index of this product is 1.64, same as most of the syntheticresin, and the particle size is nano grade, good transmittance of visible lightduring 390-780 nm, the optical property is very good.2, With special surface coated technology, low oil absorption, gooddistribution, good affinity with many kinds of resin, make the final productgood mechanical property, improve the filling rate, reduce the final cost.3, High L value, could guarantee the final product high glossy and goodbrightness.4, Without halogen, could guarantee the final product safety and cleanline
Contact Now
Application Areas:There are three principal types of industrial use for natural fluorite, corresponding to different grades of purity. Metallurgical grade fluorite has traditionally been used as a flux to lower the melting point of raw materials and eliminate impurity in steel and aluminum production.Ceramic grade fluorite is used in the manufacture of opalescent glass, enamels, and cooking utensils. The highest grade, "acid grade fluorite" (40% or more CaF2) is used to make aluminum fluoride and hydrofluoric acid by reacting to the fluorite with sulfuric acid.P
Contact Now
Application Areas:There are three principal types of industrial use for natural fluorite, corresponding to different grades of purity. Metallurgical grade fluorite has traditionally been used as a flux to lower the melting point of raw materials and eliminate impurity in steel and aluminum production.Ceramic grade fluorite is used in the manufacture of opalescent glass, enamels, and cooking utensils. The highest grade, "acid grade fluorite" (40% or more CaF2) is used to make aluminum fluoride and hydrofluoric acid by reacting to the fluorite with sulfuric acid.P
Contact Now
Application Areas：◆Oil drilling ◆Friction materials ◆Rubber ◆Radiation wallIndexTLZ-DB01TLZ-DB02AppearanceGranuleGranuleSpecial gravity ≥4.1 g/cm³4.2 g/cm³BaSO₄+ SrSO₄Content85%90%Hg ppm ≤1 ppm1 ppmCd ppm ≤3 ppm3 ppmAs ppm ≤40 ppm40 ppmPb ppm ≤1000 ppm1000 ppmSi0₂Content-3% maxFe₂O₃Content-3% maxCarbonates5000ppm max5000 ppm maxWater Soluble Alkaline Earth Metals As Calcium ≤250 mg/kg250 mg/kgMiosture2%2%Granule Size0-100 mm0-100 mm
Contact Now
Product Features:Rutile Type Titanium Dioxide R-218CAS NO.13463-67-7EINECS NO.236-675-5High-grade rutile type titanium dioxideItemSpecificationR-218Mass fraction of Tio2 /% ≥93Whiteness (compared with standard sample)not less thanBrightness % ≥94Rutile content %
Contact Now
Synthesis Process：Produce the nano barium sulfate with carbonate solution and sulfuric acid andcoated with special technology.Application Areas：Transparent filler masterbatch Car PaintsIndexTLZ-PBS302BaSO₄ Content min%98% minMoisture max %0.15Water Soluble max %0.15lron Content5 ppmWhiteness %97 minBrightness (L Value )98-99%Oil Absorption10-20 g/cm³PH6.5-9.0Particle Size D500.3 μmResidue (45 μm)0.02% maxConductivity150 μs/cm
Contact Now
Oil Drilling Grade Barite Technical Date:Index & StandardAPI StandardAnalysis ResultSpecific Gravity4.20 g/cc, min4.21 g/cc, minBaSO4/90%, minSrSO4/1.5%, maxHg1 ppm, max1 ppm, maxCd3 ppm, max3 ppm, maxPb1000 ppm, max500 ppm, maxAs40 ppm, max20 ppm, maxSiO23%, max3%, maxFe2O31% ,max1%, maxCarbonates3000 mg/l, max3000 mg/l, maxWater Soluble Alkaline Earth Metals As Calcium250 mg/kg, max100 mg/kg, maxProduct Models: IndexTLZ-DB301AppearanceGranulesSpecific gravity4.20Grain size / Particle size0-100 mmPacking: Bulk cargo, 1 Mt bags / 1.5 Mt bags o
Contact Now
Synthesis Process：Produce the nano barium sulfate with carbonate solution and sulfuric acid andcoated with special technology.Application Areas：Transparent filler masterbatch Car PaintsIndexTLZ-PBS302BaSO₄ Content min%98% minMoisture max %0.15Water Soluble max %0.15lron Content5 ppmWhiteness %97 minBrightness (L Value )98-99%Oil Absorption10-20 g/cm³PH6.5-9.0Particle Size D500.3 μmResidue (45 μm)0.02% maxConductivity150 μs/cm
Contact Now
