ltem No.SpecificationUsageTLZ-HF10CaF₂≥ 40%Used to make aluminumfluoride and hydrofluoric acidUsed to make aluminumfluoride and hydrofluoric acidTLZ-HF20CaF₂≥60%Used to make aluminumfluoride and hydrofluoric acidUsed to make aluminumfluoride and hydrofluoric acidTLZ-HF30CaF₂≥80%Used as a fluxTLZ-HF40CaF₂≥97%The raw material ofthe Acid Grade Fluorite
Contact Now
Fluorite is a major source of hydrogen fluoride, a commodity chemical used to produce a wide range of materials.
Contact Now
Application Areas:There are three principal types of industrial use for natural fluorite, corresponding to different grades of purity. Metallurgical grade fluorite has traditionally been used as a flux to lower the melting point of raw materials and eliminate impurity in steel and aluminum production.Ceramic grade fluorite is used in the manufacture of opalescent glass, enamels, and cooking utensils. The highest grade, "acid grade fluorite" (40% or more CaF2) is used to make aluminum fluoride and hydrofluoric acid by reacting to the fluorite with sulfuric acid.P
Contact Now
Application Areas:There are three principal types of industrial use for natural fluorite, corresponding to different grades of purity. Metallurgical grade fluorite has traditionally been used as a flux to lower the melting point of raw materials and eliminate impurity in steel and aluminum production.Ceramic grade fluorite is used in the manufacture of opalescent glass, enamels, and cooking utensils. The highest grade, "acid grade fluorite" (40% or more CaF2) is used to make aluminum fluoride and hydrofluoric acid by reacting to the fluorite with sulfuric acid.P
Contact Now
Application Areas:There are three principal types of industrial use for natural fluorite, corresponding to different grades of purity. Metallurgical grade fluorite has traditionally been used as a flux to lower the melting point of raw materials and eliminate impurity in steel and aluminum production.Ceramic grade fluorite is used in the manufacture of opalescent glass, enamels, and cooking utensils. The highest grade, "acid grade fluorite" (40% or more CaF2) is used to make aluminum fluoride and hydrofluoric acid by reacting to the fluorite with sulfuric acid.P
Contact Now
ltem No.SpecificationUsageTLZ-HF10CaF₂≥ 40%Used to make aluminumfluoride and hydrofluoric acidUsed to make aluminumfluoride and hydrofluoric acidTLZ-HF20CaF₂≥60%Used to make aluminumfluoride and hydrofluoric acidUsed to make aluminumfluoride and hydrofluoric acidTLZ-HF30CaF₂≥80%Used as a fluxTLZ-HF40CaF₂≥97%The raw material ofthe Acid Grade Fluorite
Contact Now
ltem No.SpecificationUsageTLZ-HF10CaF₂≥ 40%Used to make aluminumfluoride and hydrofluoric acidUsed to make aluminumfluoride and hydrofluoric acidTLZ-HF20CaF₂≥60%Used to make aluminumfluoride and hydrofluoric acidUsed to make aluminumfluoride and hydrofluoric acidTLZ-HF30CaF₂≥80%Used as a fluxTLZ-HF40CaF₂≥97%The raw material ofthe Acid Grade Fluorite
Contact Now
IndexTLZ-CC1250TLZ-CC2500CaCO₃content ≥%98-9998-99Particle Size D50 μm5-718-2.5325 mesh Residue00Whiteness %9597Specific Gravity2.72.7Postulate Specific Gravity110.65Moisture ≤%0.150.15PH7.5+1.07.5±1.0Oil Absorption15-20 g/cm³18-25 g/cm³Sediment Volume 30 min (ml)7878Sediment Volume 60 min (ml)7474
Contact Now
Application Areas：◆Oil drilling ◆Friction materials ◆Rubber ◆Radiation wallIndexTLZ-DB01TLZ-DB02AppearanceGranuleGranuleSpecial gravity ≥4.1 g/cm³4.2 g/cm³BaSO₄+ SrSO₄Content85%90%Hg ppm ≤1 ppm1 ppmCd ppm ≤3 ppm3 ppmAs ppm ≤40 ppm40 ppmPb ppm ≤1000 ppm1000 ppmSi0₂Content-3% maxFe₂O₃Content-3% maxCarbonates5000ppm max5000 ppm maxWater Soluble Alkaline Earth Metals As Calcium ≤250 mg/kg250 mg/kgMiosture2%2%Granule Size0-100 mm0-100 mm
Contact Now
Product Name: Titanium DioxideIndexR-2196TiO2% (1S0 591-1)94%CIEL*(GB/T 1864-2012)95.5Reducing Power (TCS)1950PH Value (lSO 787-9)7.0Oil Absorption (lSO 787-5)19g/100 gResidue on 45μm(lS0 787-18)0.01%Resistivity (lSO 787-14)100Ω-mVolatiles at 105℃(ISO 787-14)0.3%Typical Properties：IndexR-2196Processing MethodSulfateCrystal FormRutileInorganic Surface TreatmentZrOz, ALO:Organic Surface TreatmentYesClassification (lS0 591-1)R2Color (lS0 787-25)△E≤0.5Relative Scattering Power (lSO 787-24)95%-105%Density(lS0 787-10)4.0 g/cm³Dispersion in Polyester System(GB/T 21868.3-2008)≤27.5 μmTitanium Dio
Contact Now
IndexR-2196Ti02% (1S0 591-1)94%CIEL*(GB/T 1864-2012)95.5Reducing Power (TCS)1950pH Value (lSO 787-9)7.0Oil Absorption (lSO 787-5)19g/100 gResidue on 45μm(lS0 787-18)0.01%Resistivity (lSO 787-14)100Ω-mVolatiles at 105℃(ISO 787-14)0.3%Typical Properties：IndexR-2196Processing MethodSulfateCrystal FormRutileInorganic Surface TreatmentZrOz, ALO:Organic Surface TreatmentYesClassification (lS0 591-1)R2Color (lS0 787-25)△E≤0.5Relative Scattering Power (lSO 787-24)95%-105%Density(lS0 787-10)4.0 g/cm³Dispersion in Polyester System(GB/T 21868.3-2008)≤27.5 μm
Contact Now
IndexR-2196Ti02% (1S0 591-1)94%CIEL*(GB/T 1864-2012)95.5Reducing Power (TCS)1950pH Value (lSO 787-9)7.0Oil Absorption (lSO 787-5)19g/100 gResidue on 45μm(lS0 787-18)0.01%Resistivity (lSO 787-14)100Ω-mVolatiles at 105℃(ISO 787-14)0.3%Typical Properties：IndexR-2196Processing MethodSulfateCrystal FormRutileInorganic Surface TreatmentZrOz, ALO:Organic Surface TreatmentYesClassification (lS0 591-1)R2Color (lS0 787-25)△E≤0.5Relative Scattering Power (lSO 787-24)95%-105%Density(lS0 787-10)4.0 g/cm³Dispersion in Polyester System(GB/T 21868.3-2008)≤27.5 μm
Contact Now
Application Areas：◆Oil drilling ◆Friction materials ◆Rubber ◆Radiation wallIndexTLZ-DB01TLZ-DB02AppearanceGranuleGranuleSpecial gravity ≥4.1 g/cm³4.2 g/cm³BaSO₄+ SrSO₄Content85%90%Hg ppm ≤1 ppm1 ppmCd ppm ≤3 ppm3 ppmAs ppm ≤40 ppm40 ppmPb ppm ≤1000 ppm1000 ppmSi0₂Content-3% maxFe₂O₃Content-3% maxCarbonates5000ppm max5000 ppm maxWater Soluble Alkaline Earth Metals As Calcium ≤250 mg/kg250 mg/kgMiosture2%2%Granule Size0-100 mm0-100 mm
Contact Now
Index & StandardAnalysis ResultTLZ-NBS12BaSO4 Content≥88%D50 Particle size1.2-1.7 μmWhiteness (dry)≥92Specific Gravity4.00 g/m3Oil Absorption≤10 ml /100 gPH Value7±1Moisture≤0.15%The Residue (325 mesh)noApplication Areas:1. Flat and textured powder coating2. Oil base and water base paints and powder coating3. Plastic (high gloss PP, ABS, Masterbatch and etc.)4. Rubber5. Glue
Contact Now
Index & StandardAnalysis ResultTLZ-NBS22BaSO4 Content≥92%D50 Particle size1.2-1.7 μmWhiteness (dry)≥92Specific Gravity4.20 g/m3Oil Absorption≤10 ml /100 gPH Value7±1Moisture≤0.15%The Residue (325 mesh)noApplication Areas :1. Flat and textured powder coating2. Oil base and water base paints and powder coating3.Plastic (high gloss PP, ABS, Masterbatch and etc.)4. Rubber5. Glue
Contact Now
Index & StandardAnalysis ResultTLZ-NBS11BaSO4 Content≥88%D50 Particle size5-7 μmWhiteness (dry)≥90Specific Gravity4.00 g/m3Oil Absorption≤7 ml /100 gPH Value7±1Moisture≤0.15%The Residue (325 mesh)noApplication Areas:1. Flat and textured powder coating2.Oil base and water base paints and powder coating3. Plastic (high gloss PP, ABS, Masterbatch and etc.)4. Rubber5. Glue
Contact Now
Index & StandardAnalysis ResultTLZ-NBS21BaSO4 Content≥92%D50 Particle size5-7 μmWhiteness (dry)≥90Specific Gravity4.20 g/m3Oil Absorption≤7 ml /100 gPH Value7±1Moisture≤0.15%The Residue (325 mesh)noApplication Areas:1. Flat and textured powder coating2. Oil base and water base paints and powder coating3.Plastic (high gloss PP, ABS, Masterbatch and etc.).4. Rubber5. Glue
Contact Now
Plastic Grade Natural Barium Sulfate is a type of Semi-glossy Barite Powder and also a Superfine Barite Powder. It has very high whiteness and very small particle size. Its small particle size is evenly distributed in the plastic, which enhances the stability and durability of the plastic. It helps save costs and improve quality. It is a very good ingredient and is widely used in the plastic industry.
Contact Now
Application Areas：◆Oil drilling ◆Friction materials ◆Rubber ◆Radiation wallIndexTLZ-DB01TLZ-DB02AppearanceGranuleGranuleSpecial gravity ≥4.1 g/cm³4.2 g/cm³BaSO₄+ SrSO₄Content85%90%Hg ppm ≤1 ppm1 ppmCd ppm ≤3 ppm3 ppmAs ppm ≤40 ppm40 ppmPb ppm ≤1000 ppm1000 ppmSi0₂Content-3% maxFe₂O₃Content-3% maxCarbonates5000ppm max5000 ppm maxWater Soluble Alkaline Earth Metals As Calcium ≤250 mg/kg250 mg/kgMiosture2%2%Granule Size0-100 mm0-100 mm
Contact Now
Application Areas：◆Oil drilling ◆Friction materials ◆Rubber ◆Radiation wallIndexTLZ-DB01TLZ-DB02AppearanceGranuleGranuleSpecial gravity ≥4.1 g/cm³4.2 g/cm³BaSO₄+ SrSO₄Content85%90%Hg ppm ≤1 ppm1 ppmCd ppm ≤3 ppm3 ppmAs ppm ≤40 ppm40 ppmPb ppm ≤1000 ppm1000 ppmSi0₂Content-3% maxFe₂O₃Content-3% maxCarbonates5000ppm max5000 ppm maxWater Soluble Alkaline Earth Metals As Calcium ≤250 mg/kg250 mg/kgMiosture2%2%Granule Size0-100 mm0-100 mm
Contact Now
Product Features:1, The refractive index of this product is 1.64, same as most of the syntheticresin, and the particle size is nano grade, good transmittance of visible lightduring 390-780 nm, the optical property is very good.2, With special surface coated technology, low oil absorption, gooddistribution, good affinity with many kinds of resin, make the final productgood mechanical property, improve the filling rate, reduce the final cost.3, High L value, could guarantee the final product high glossy and goodbrightness.4, Without halogen, could guarantee the final product safety and cleanline
Contact Now
Product Features:1, The refractive index of this product is 1.64, same as most of the syntheticresin, and the particle size is nano grade, good transmittance of visible lightduring 390-780 nm, the optical property is very good.2, With special surface coated technology, low oil absorption, gooddistribution, good affinity with many kinds of resin, make the final productgood mechanical property, improve the filling rate, reduce the final cost.3, High L value, could guarantee the final product high glossy and goodbrightness.4, Without halogen, could guarantee the final product safety and cleanline
Contact Now
Synthesis Process：Produce the nano barium sulfate with carbonate solution and sulfuric acid andcoated with special technology.Application Areas：Transparent filler masterbatch Car PaintsIndexTLZ-PBS302BaSO₄ Content min%98% minMoisture max %0.15Water Soluble max %0.15lron Content5 ppmWhiteness %97 minBrightness (L Value )98-99%Oil Absorption10-20 g/cm³PH6.5-9.0Particle Size D500.3 μmResidue (45 μm)0.02% maxConductivity150 μs/cm
Contact Now
Product Features:1, The refractive index of this product is 1.64, same as most of the syntheticresin, and the particle size is nano grade, good transmittance of visible lightduring 390-780 nm, the optical property is very good.2, With special surface coated technology, low oil absorption, gooddistribution, good affinity with many kinds of resin, make the final productgood mechanical property, improve the filling rate, reduce the final cost.3, High L value, could guarantee the final product high glossy and goodbrightness.4, Without halogen, could guarantee the final product safety and cleanline
Contact Now
