CaF₂-manufacture,factory,supplier from China

ltem No.SpecificationUsageTLZ-HF10CaF₂≥ 40%Used to make aluminumfluoride and hydrofluoric acidUsed to make aluminumfluoride and hydrofluoric acidTLZ-HF20CaF₂≥60%Used to make aluminumfluoride and hydrofluoric acidUsed to make aluminumfluoride and hydrofluoric acidTLZ-HF30CaF₂≥80%Used as a fluxTLZ-HF40CaF₂≥97%The raw material ofthe Acid Grade Fluorite

Index &   StandardAnalysis   ResultBaSO4 Content≥94%Whiteness   (dry)≥88Specific   Gravity≥4.3   g/m3Particle size D50Appx. 2umOil Absorption10 ml /100 gPH Value7±1Moisture≤0.15%The Residue (325   mesh)noNatural Barium Sulfate Technical Data:Powder coatingPaintPlasticsRubberFilmsPapermakingPharmaceuticals

IndexTLZ-NBS31TLZ-NBS32BaSO₄Content95% min95% minParticle Size D50 (μm)3-4 μm1-2μmWhiteness %90 min90 minSpecific Gravity (g/cm³)4.35/cm³4.35/cm³Oil absorption (mV100g)7 ml100g10 mV100gPH7±17±1Moisture %0.15 % max0.15 % maxResidue (45 um)-10-40%Addition ratio10-40%TLZ-NBS32Natural Barium Sulfate Technical Data:Powder coatingPaintPlasticsRubberFilmsPapermakingPharmaceuticals

Product Features:1, The refractive index of this product is 1.64, same as most of the syntheticresin, and the particle size is nano grade, good transmittance of visible lightduring 390-780 nm, the optical property is very good.2, With special surface coated technology, low oil absorption, gooddistribution, good affinity with many kinds of resin, make the final productgood mechanical property, improve the filling rate, reduce the final cost.3, High L value, could guarantee the final product high glossy and goodbrightness.4, Without halogen, could guarantee the final product safety and cleanline

Product Features:1, The refractive index of this product is 1.64, same as most of the syntheticresin, and the particle size is nano grade, good transmittance of visible lightduring 390-780 nm, the optical property is very good.2, With special surface coated technology, low oil absorption, gooddistribution, good affinity with many kinds of resin, make the final productgood mechanical property, improve the filling rate, reduce the final cost.3, High L value, could guarantee the final product high glossy and goodbrightness.4, Without halogen, could guarantee the final product safety and cleanline

Paint Grade Precipitated Barium Sulfate is very common in precipitated barium sulfate manufacturer. Precipitated barium sulfate will not fade or darken regardless of color or gloss. The surface gloss is very high after polishing, and impurities brought by various weather conditions can hardly adhere. It is widely used as a raw material in the paint industry. Precipitated barium sulfate for paint will not fade or darken regardless of color or gloss.

Plastic Grade Natural Barium Sulfate – High-Performance Filler for PlasticsIntroductionPlastic Grade Natural Barium Sulfate is a high-purity, naturally sourced barium sulfate (BaSO₄) designed to enhance the mechanical and optical properties of plastic materials.

ltem No.SpecificationUsageTLZ-HF10CaF₂≥ 40%Used to make aluminumfluoride and hydrofluoric acidUsed to make aluminumfluoride and hydrofluoric acidTLZ-HF20CaF₂≥60%Used to make aluminumfluoride and hydrofluoric acidUsed to make aluminumfluoride and hydrofluoric acidTLZ-HF30CaF₂≥80%Used as a fluxTLZ-HF40CaF₂≥97%The raw material ofthe Acid Grade Fluorite

Rubber-grade zinc oxide is used in a wide range of rubber products, including radial and bias tires, conveyor belts, hoses, tape, rubber, and latex glovesTest ItemsIndicatorsTest ResultsZinc Oxide Content (Dry Basis) %≥95%97.16Volatiles at 105℃ %≤1.00.54Water-Soluble Substances Content %≤1.00.03Ignition Loss %1.0-4.01.74Insoluble Substances in Hydrochloric Acid %≤0.040.018Manganese (Mn) %≤0.0050.0004Lead (Pb) %≤0.0070.0003Cadmium (Cd) %≤0.0040.0001        Copper (Cu) %≤0.0008--Whiteness (L*)≥9898.58Specific Surface Area≥45>45Residue on 45um Sieve≤0.10.08Median Particle S

Application Areas:There are three principal types of industrial use for natural fluorite, corresponding to different grades of purity. Metallurgical grade fluorite has traditionally been used as a flux  to lower the melting point of raw materials and eliminate impurity  in steel and aluminum production.Ceramic grade fluorite is used in the manufacture of opalescent glass, enamels, and cooking utensils. The highest grade, "acid grade fluorite" (40% or more CaF2) is used to make aluminum fluoride and hydrofluoric acid by reacting to the fluorite with sulfuric acid.P

Application Areas:There are three principal types of industrial use for natural fluorite, corresponding to different grades of purity. Metallurgical grade fluorite has traditionally been used as a flux  to lower the melting point of raw materials and eliminate impurity  in steel and aluminum production.Ceramic grade fluorite is used in the manufacture of opalescent glass, enamels, and cooking utensils. The highest grade, "acid grade fluorite" (40% or more CaF2) is used to make aluminum fluoride and hydrofluoric acid by reacting to the fluorite with sulfuric acid.P

Application Areas:There are three principal types of industrial use for natural fluorite, corresponding to different grades of purity. Metallurgical grade fluorite has traditionally been used as a flux  to lower the melting point of raw materials and eliminate impurity  in steel and aluminum production.Ceramic grade fluorite is used in the manufacture of opalescent glass, enamels, and cooking utensils. The highest grade, "acid grade fluorite" (40% or more CaF2) is used to make aluminum fluoride and hydrofluoric acid by reacting to the fluorite with sulfuric acid.P

Product Features:Barium chloride is an inorganic compound with the formula BaCl₂. It is one of the most common water-soluble salts of barium. Like most other barium salts, it is white, toxic, and imparts a yellow-green coloration to a flame. It is also hygroscopic, converting first to the dihydrate BaCl₂(H₂O)₂.Formula: BaCl2Molar mass: 208.23 g/molMelting point: 1,764°F (962°C)Boiling point: 2,840°F (1,560°C)Density: 3.86 g/cm³It is commonly used as a test for sulfate ion.

IndexR-2196Ti02% (1S0 591-1)94%CIEL*(GB/T 1864-2012)95.5Reducing Power (TCS)1950pH Value (lSO 787-9)7.0Oil Absorption (lSO 787-5)19g/100 gResidue on 45μm(lS0 787-18)0.01%Resistivity (lSO 787-14)100Ω-mVolatiles at 105℃(ISO 787-14)0.3%Typical Properties：IndexR-2196Processing MethodSulfateCrystal FormRutileInorganic Surface TreatmentZrOz, ALO:Organic Surface TreatmentYesClassification (lS0 591-1)R2Color (lS0 787-25)△E≤0.5Relative Scattering Power (lSO 787-24)95%-105%Density(lS0 787-10)4.0 g/cm³Dispersion in Polyester System(GB/T 21868.3-2008)≤27.5 μm

IndexR-2196Ti02% (1S0 591-1)94%CIEL*(GB/T 1864-2012)95.5Reducing Power (TCS)1950pH Value (lSO 787-9)7.0Oil Absorption (lSO 787-5)19g/100 gResidue on 45μm(lS0 787-18)0.01%Resistivity (lSO 787-14)100Ω-mVolatiles at 105℃(ISO 787-14)0.3%Typical Properties：IndexR-2196Processing MethodSulfateCrystal FormRutileInorganic Surface TreatmentZrOz, ALO:Organic Surface TreatmentYesClassification (lS0 591-1)R2Color (lS0 787-25)△E≤0.5Relative Scattering Power (lSO 787-24)95%-105%Density(lS0 787-10)4.0 g/cm³Dispersion in Polyester System(GB/T 21868.3-2008)≤27.5 μm

Product Name: Titanium DioxideIndexR-2196TiO2% (1S0 591-1)94%CIEL*(GB/T 1864-2012)95.5Reducing Power (TCS)1950PH Value (lSO 787-9)7.0Oil Absorption (lSO 787-5)19g/100 gResidue on 45μm(lS0 787-18)0.01%Resistivity (lSO 787-14)100Ω-mVolatiles at 105℃(ISO 787-14)0.3%Typical Properties：IndexR-2196Processing MethodSulfateCrystal FormRutileInorganic Surface TreatmentZrOz, ALO:Organic Surface TreatmentYesClassification (lS0 591-1)R2Color (lS0 787-25)△E≤0.5Relative Scattering Power (lSO 787-24)95%-105%Density(lS0 787-10)4.0 g/cm³Dispersion in Polyester System(GB/T 21868.3-2008)≤27.5 μmTitanium Dio

Product Features:Rutile Type Titanium Dioxide R-218CAS NO.13463-67-7EINECS NO.236-675-5High-grade rutile type titanium dioxideItemSpecificationR-218Mass fraction of Tio2 /%                 ≥93Whiteness (compared with standard sample)not less thanBrightness %                           ≥94Rutile content %           

Synthesis Process：Produce the nano barium sulfate with carbonate solution and sulfuric acid andcoated with special technology.Application Areas：Transparent filler masterbatch   Car PaintsIndexTLZ-PBS302BaSO₄ Content min%98% minMoisture max %0.15Water Soluble max %0.15lron Content5 ppmWhiteness %97 minBrightness  (L Value )98-99%Oil Absorption10-20 g/cm³PH6.5-9.0Particle Size D500.3 μmResidue (45 μm)0.02% maxConductivity150 μs/cm

Synthesis Process：Produce the nano barium sulfate with carbonate solution and sulfuric acid andcoated with special technology.Application Areas：Transparent filler masterbatch   Car PaintsIndexTLZ-PBS302BaSO₄ Content min%98% minMoisture max %0.15Water Soluble max %0.15lron Content5 ppmWhiteness %97 minBrightness  (L Value )98-99%Oil Absorption10-20 g/cm³PH6.5-9.0Particle Size D500.3 μmResidue (45 μm)0.02% maxConductivity150 μs/cm

IndexR-2196Ti02% (1S0 591-1)94%CIEL*(GB/T 1864-2012)95.5Reducing Power (TCS)1950pH Value (lSO 787-9)7.0Oil Absorption (lSO 787-5)19g/100 gResidue on 45μm(lS0 787-18)0.01%Resistivity (lSO 787-14)100Ω-mVolatiles at 105℃(ISO 787-14)0.3%Typical Properties：IndexR-2196Processing MethodSulfateCrystal FormRutileInorganic Surface TreatmentZrOz, ALO:Organic Surface TreatmentYesClassification (lS0 591-1)R2Color (lS0 787-25)△E≤0.5Relative Scattering Power (lSO 787-24)95%-105%Density(lS0 787-10)4.0 g/cm³Dispersion in Polyester System(GB/T 21868.3-2008)≤27.5 μm

Application Areas：◆Oil drilling  ◆Friction materials  ◆Rubber  ◆Radiation wallIndexTLZ-DP01TLZ-DP02AppearanceOff-white PowderOff-white PowderSpecial gravity ≥4.1 g/cm³4.2 g/cm³BaSO₄+ SrSO₄Content85%90%Hg ppm ≤1 ppm1 ppmCd ppm ≤3 ppm3 ppmAs ppm ≤40 ppm40 ppmPb ppm ≤1000 ppm1000 ppmSi0₂Content-3% maxFe₂O₃Content-3% maxCarbonates5000  ppm max5000 ppm maxWater Soluble Alkaline Earth Metals As Calcium ≤250  mg/kg250 mg/kgMiosture2%2%Particle Size 75μm Residue≤ 3%≤ 3%Particle Size ≤ 6μm≤30%≤30%

ltem No.SpecificationUsageTLZ-HF10CaF₂≥ 40%Used to make aluminumfluoride and hydrofluoric acidUsed to make aluminumfluoride and hydrofluoric acidTLZ-HF20CaF₂≥60%Used to make aluminumfluoride and hydrofluoric acidUsed to make aluminumfluoride and hydrofluoric acidTLZ-HF30CaF₂≥80%Used as a fluxTLZ-HF40CaF₂≥97%The raw material ofthe Acid Grade Fluorite

Fluorite is a major source of hydrogen fluoride, a commodity chemical used to produce a wide range of materials.

Barite Used in Drilling MudIntroductionBarite, a naturally occurring mineral composed of barium sulfate (BaSO₄), is widely used in the oil and gas industry as a weighting agent in drilling mud.